Sintering furnaces that contain MoSi2 heating elements DO require maintenance or cleaning cycles. If not performed regularly, it is likely you can have a shift in color of the final product.
SIMUWU has been building heat-treating equipment for the global market. Its furnace designs are based on its heat-treating experience and have been proven through years of service.
Grinding steel ball heat treatment typically includes heating, insulation and cooling processes. These steps connect with each other and can’t be interrupted. Wherein, heating is an important step. There are many heating methods for heat treatment. Charcoal and coal are the oldest heat producer, which are generally replaced by liquid or gas fuels. The electricity application makes temperature control easier and no environment pollution. These heat fuels can be used to heat directly or indirectly by molten salt or floating particles.
Sintering is essentially the same process as that used for traditional die pressed Powder Metallurgy parts and can be done in continuous or batch type furnaces, either as separate units or integrated into a complete production line.
Industrial furnace used aluminum silicate fiber board, if the tensile strength is low, the surface will easily appear crack and wrinkle.This leads to layer and peeling when cutting, the cutting surface is rough, can not be cut into small panel.
The lining of introduction melting furnace is divided into four parts: furnace lid, furnace hearth, throat and and sensor. Especially throat,the most critical position’s refractory material directly affects the life and operating costs of the furnace.
Investment casting requires the use of a metal die, wax, ceramic slurry, furnace, molten metal, and any machines needed for sandblasting, cutting, or grinding. The process steps include the following:
GCr15 Bearing Steel Heat Treatment Is GCr15 bearing ste…
The pattern is surrounded, or “invested”, into ceramic slurry that hardens into the mold. Investment casting is often referred to as “lost-wax casting” because the wax pattern is melted out of the mold after it has been formed.
Vacuum arc double electrode remelting furnace Vacuum ar…