Downloads
All documents in the overview
News & Press
All news at a glance
Request
Send us a message
Email: contact@vacfurnace.com
Tel : 86-21-50878190
Heat treatment : Frank +86 -188 5001 9186
Powder metallurgy： Jessica +86 -159 0193 1519
Address: NO.1299, XinJinQiao Road, Pudong New Area, Shanghai, China.
Process Flow of Sintering NdFeB
The process flow of sintering NdFeB can be roughly divided into the following steps： 1.Ingredients, the main raw material of neodymium iron boron magnets is the rare earth metal neodymium 29%, metal element iron and non-metal element boron with a small amount of dysprosium, niobium, aluminum, c...
Application of vacuum brazing on aluminum honeycomb panels of railway vehicles
As an important lightweight material, aluminum honeycomb panels are widely used in the aviation manufacturing industry, and have long been used in foreign railway vehicles. Its uses are quite wide, such as the French TGV series and the Italian ETR series high-speed trains. The domestic use of alu...
Application of EGR cooler
The role of EGR cooling system： The EGR cooling system is a device designed to reduce NOx emissions from automobile exhaust, and is an exhaust gas recirculation system. At a higher speed of the car, a small amount of exhaust gas is reintroduced into the intake valve. The temperature of the exha...
Application of plate and bar cooler
Structure of plate and bar cooler（plate-fin heat exchanger）: It usually consists of baffles, fins, seals head, and deflectors. Place fins, deflectors and seals between two adjacent baffles to form an interlayer, called a channel. Stack these interlayers according to different ways of fluid and ...
Vacuum brazed Oil Cooler
The oil cooler is mainly used for the cooling of engine lubricating oil or fuel oil of vehicles, engineering machinery, ships, etc. The hot side of the product is lubricating oil or fuel oil, and the cold side can be cooling water or air. When the vehicle is driving, the lubricating oil in the ma...