Downloads
All documents in the overview
News & Press
All news at a glance
Request
Send us a message
Email: contact@vacfurnace.com
Tel : 86-21-50878190
Heat treatment : Frank +86 -188 5001 9186
Powder metallurgy： Jessica +86 -159 0193 1519
Address: NO.1299, XinJinQiao Road, Pudong New Area, Shanghai, China.
Injection Molding And Sintering Of Titanium Alloy Powder
In the injection molding of titanium and titanium alloy, the performance of powder and binder has the greatest influence. The oxygen content and particle shape of powder are important influencing factors, and powder with low oxygen content should be selected: powder particle shape selection shoul...
Preparation Of Tungsten Copper Alloy Contacts
Step 1: According to the mass ratio of CuO powder and W powder 1:1, mix the CuO powder and W powder evenly. Step 2: Reduce the mixed powder at 450℃ under the atmosphere of hydrogen for 1h, then compacting, pressing and forming, and breaking it into powder. Then at the temperature of 700℃, under t...
Vacuum brazed diamond hole saw
Diamond is the hardest material found in the world and can be widely used in industry. In addition to its superhard properties, it has unique mechanical, optical, acoustic, thermal and electrical properties. It is not only an important superhard material, but also a new functional material with s...
Introduction and application of boron carbide
History of boron carbide: it was discovered in the 19th century as a byproduct of the study of metal borides, and was not scientifically studied until the 1930s. It is the fifth hardest material known after boron nitride, diamond, fullerene compound and diamond whole fiber tube. Boron carbide Eng...
vacuum sintering furnace for boron carbide bullet proof
With the large-scale development of modern war lethality weapons, the early bulletproof materials can not meet the performance requirements of bulletproof materials. It is of great strategic significance for national defense to seek for bulletproof materials with superior performance. As early bu...
Vacuum Dewaxing & Sintering Furnace RVS-D Series
Vacuum Dewaxing & Sintering Furnace Description : It is mainly applied for dewexing and sintering process of cemented carbide,ceramic , stainless steel,powder metallurgy, iron base, titanium alloy, alloy steel and high-speed steel and other materials MIM (Metal injection Molding) process. Vac...
Vacuum Dewaxing Furnace RVD- Series
Vacuum Dewaxing Furnace Description : Vacuum dewaxing furnace equipment is mainly used for iron, stainless steel, titanium alloy, alloy steel and high-speed steel and other materials, injection molding products, dewaxing process. Vacuum Dewaxing Furnace Technical Parameter: Model Temperature U...
High temperature Ndfeb sintering
Relative density of sintered ndfeb powder compact is larger, the interparticle contact is a mechanical contact, low bond strength, in order to further improve the density, improve the nature of contact between the powder particles, increase strength, make the magnets with high magnetic performanc...
Carbon fiber high temperature graphitization furnace
Carbon fiber can be divided into several types, such as viscose carbon fiber, asphalt carbon fiber, polyacrylonitrile carbon fiber, phenolic carbon fiber and so on.Viscose carbon fiber was first invented, but now the most widely used carbon fiber is polyacrylonitrile carbon fiber, up to 90% of al...
Vacuum Brazing Furnace RVB-L Series
vacuum brazing furnace description ： Low temperature vacuum brazing furnace widely used in aluminum fin type heat exchanger, car radiator, car air conditioning evaporator, condenser, radar network antenna and aluminum brazing products such as waveguide pipe and all kinds of aluminum welding part...