Downloads
All documents in the overview
News & Press
All news at a glance
Request
Send us a message
Email: contact@vacfurnace.com
Heat treatment : Frank +86 -188 5001 9186
Powder metallurgy： Jessica +86 -159 0193 1519
Address: NO.1299, XinJinQiao Road, Pudong New Area, Shanghai, China.
Vacuum heat treatment line
In recent years, along with the development and application of vacuum heat treatment, the scale and level of rapid ascension, not content to a single or a few vacuum heat treatment furnace of continuous production, began to develop in the vacuum heat treatment production line. Abroad has a lot o...
Decarburization vacuum heat treatment
Vacuum furnace deep decarburization process basically is decided according to the processing of oxygen, the concentration of the surplus in molten steel is still very high, even more than three hundred, and then this case should increase the air flow, the flow of the whole flow ascension in 150 c...
Supply frequency induction furnace
Power frequency induction furnace frequency power mixing results better. Power frequency power is too large stirring force to make the molten steel on the lining of the scouring force for the removal of impurities in the steel and uniform chemical composition, uniform temperature. Not only landed...
Ultra-high temperature molybdenum wire sintering furnace
Ultra-high temperature molybdenum wire sintering furnace Details: Ultra-high temperature molybdenum wire sintering furnace purposes Sintering of high purity tungsten / molybdenum products Sintering of high purity alumina products Phosphor reduction treatment Sintering of Tungsten Copper Alloy Po...
Ultra-low carbon steel vacuum heat treatment furnace
In the process of low carbon production vacuum furnace steel, early stage is the most difficult to control the process of decarburization and postal rapid aluminum deoxygenation and alloying. China vacuum furnace, by optimizing decarburization process, the stability of the equipment performance u...
Aluminum liquid holding furnace
Aluminum liquid holding furnace Product introduction: Aluminum liquid holding furnace is mainly used for storage of aluminum or aluminum alloy melt through the melting furnace runner transfer to the holding furnace in the aluminum or aluminum alloy melt by standing, after the temperature adjustme...
Double chamber vacuum oil quenching furnace
When the workpiece is in the oil cooling process, the oil cooling chamber shall be filled with the nitrogen of the pressure (0.4-0.67) x 105Pa (300 ~ 500). Cold indoor fill nitrogen, not only can improve the cooling capacity of the vacuum quenching oil, parts can reach pressure quenching hardness...
Regenerative melting furnace
1. Thermal storage technology overview With the progress of equipment and materials, regenerative heat exchange technology has been revolutionized and greatly improved. Currently in the metallurgical enterprises furnace and ladle roaster has been widely used. This paper introduces the application...
Horizontal Type Single Chamber Vacuum Annealing Furnace
Horizontal Type Single Chamber Vacuum Annealing Furnace is outlined, the whole fiber double furnace plate type resistance furnace, the periodic operation furnace, special for the vacuum protection atmosphere of titanium tube, titanium alloy tube annealing heat treatment heating. The furnace and P...
Metal filter sintering furnace horizontal
Metal filter sintering furnace Horizontal Introduction: Metal filter sintering furnace, used for sintering metal mesh filter material, the maximum temperature of 1450 degrees, the ultimate vacuum of 2×10-3pa, thermal insulation layer can choose all-metal screen, molybdenum screen + ceramic ...